A bunch of freakin' stuff

Topic #1: Flies in the ointment
     It really sucks when you have nice pieces that are irreparably flawed in some way.  These are three such items.  The top two are in pieces now, but the designs will undoubtedly be used again.  The bottom one is still usable, just not sell-able.  It will take up residence on the kitchen window sill.

This was an experiment with underglaze and wax resist.  The experiment worked fine; the bits of detritus that settled in the bottom of the cup did not.

The sacred cow had two little pop-outs from bits of who knows what in the clay. 

Unfortunately that light spot on the left is not just a glare.  Apparently part of the slip got rubbed or washed off at some point in time.

Topic #2: The ones that didn't get away.
     I unloaded a glaze kiln today and all in all, it was a good firing.  There were a few bigger pieces and a couple plates in this load, so I didn't get quite as many pieces in as normal.  Thankfully all the orders I had in there came out suitably well.  Here are a few shots of some of the keepers.

Piggy bank...obviously.

Part of a "donation" for an upcoming show.  There was no booth fee, but there was a required donation for a pre show viewing thing.

SETI inspired works just in time for "World UFO Day" celebrated on June 24 (or July 2, depending on your source).

Flies can be cool.

Civet decoration on a coffee pot...wicked cool.

Round two got loaded a little while ago.  It should be out tomorrow night.  The only bad thing about having all this new work is that now I have to take pictures of everything.  That is probably the only part of the whole process that I really dislike.

Topic #3: Living on the edge
     Or on the rim, I guess.  I was playing around with the rim on a couple of ice buckets today, trying to do something more with them than just an abrupt ending. I was pretty happy with the results.

It looks better than what showed up in this picture.  I think I will try this with a split rim too.


Topic #4: The most expensive clay in the world
     I have heard this little quip as a way of describing reclaimed clay.  I have also heard that if you have more time than money you should make (or re-make in this case) it instead of buy it.  Since I unquestionably fall into the category of more time than money, I will continue to reclaim my clay.  To do this I needed to make a new plaster slab as my old one was getting a bit tattered.  Perhaps that was the reason for the little pops on the sacred cow.

I put this frame together today.  I ran a couple1" dowel rods through it to help support the slab as the bottom will be removed once the plaster has set up.  Now all I have to do is figure out how to mix good, strong plaster.

Topic #5:  It's killin' me
     This killin' time, that is.  Or perhaps it is the Easter candy sitting on the counter.  So what do we do while staring at Easter candy, waiting for a kiln to cool?  Make "chocolate" covered pretzels, of course.

To be honest, they are not actually covered with chocolate.  The Easter candy was made out of sugar and oil with natural and artificial chocolate flavoring.  Not really something I need to put in my body, but when combined with little pretzels it doesn't seem quite as bad. 

Next week: Which is better, a turkey or Mr. T?

Pondering the Pig Problem

I meant to post this last weekend, but you know how things go. And quite frankly, posting crap on the internet is not really my first priority...ever. On one hand I understand how this can be used as a sort of journal as well as an important part of marketing myself and my wares. On the other hand, I just don't care. It is sometimes annoying and feels like an obligation as opposed to something I want to do.

And on that note, here we go. The past few weeks, while school was on semester break, I got quite a bit of work done. I was pleased. School started the 3rd, though, and since then studio work has come almost to a stand still. So I guess this is actually a look back at what I accomplished the last week of break.

These are a couple simple wine sets. They are pretty simple, just cylinders, so they are good to warm up with. And they are largish, so they provide a good surface for decoration. I made these with wine cups as opposed to stemmed glasses. Not that I have anything against stemmed vessels; I have actually been working on making some to include in a wine set. In my mind, though, the stemmed glasses seem much more formal. I like the idea that these are for the more casual wine drinker; someone who is taking them on a pic-nick or just hanging out on the back porch. A cup seems more suited to that.


Salt & pepper shakers. Nothing groundbreaking or anything. I am refining the shape a bit, but you can't really tell here. And aren't potters always refining the shapes of their work a bit? At least I am.


These are parts for some banks I am working on. My wife said make banks...so I make banks. I made a few of these a while back actually, and was ruminating on how best to get the money out. I went with lidded banks for these. Perhaps a bit more difficult to save money if they are so easy to get into, but I guess folks will just have to learn some self control. (A tall order these days, I know.)

So these are bases and lids. I made sure to leave enough clay on these lids to trim an ample knob. They are actually all trimmed now, but no pictures yet.

And the one below is an almost completed bank. I obviously did not leave enough clay to trim a knob on this one, but that was intentional. The plan for this was an animal knob. A pig, specifically. Easy enough, right? Well, apparently not. I attempted to make a nice little pig to stick on top there, then I attempted to make another...then I attempted to make another.

I even had a nice little toy pig to look at when making these attempts. But alas I could not come up with anything I was happy with. Part of the problem is that I want to have at least a somewhat realistic animal. I do not, however, want to spend a great deal of time modeling and carving the animal.
Solution? Obviously practice is the most logical one. The more animals I make the better and faster I will be able to make them. I am looking into other options, though, to expedite the process. I have considered finding or making a plaster mold of a small toy pig, leaving a knob and stamping the top of it with a pig stamp, carving the image of a pig into the lid, etc. I would really rather have a three dimensional animal on there, though. Any suggestions send them my way.

And finally, my wife said make salt cellars...so I made salt cellars. The lid of the one in front is small enough that it doesn't really need a knob, but I think it would probably look better if it had one. Neither has a space for a spoon, but these were fun to make so I will undoubtedly make more in the future, perhaps with spoons.

I guess that is all for now. We did not have school today due to inclement weather. I may post something regarding that topic later.

-Rob